Walton Primo S2 Official Firm Ware

WALTON Primo S2 Official Firmware, Flashtools & Drivers

DOWNLOAD
Instructions

1. Download and Extract the ZIP archive linked above.
2. Browse to the Primo S2 Official Firmware/Drivers folder. Double-click onGN_QC_EN_Driver_V1.1.0.0.exe to install the driver.
3. If your device is bricked, nothing except the lights of the hardware buttons should light up. So, make sure it is bricked, switch on your phone and connect it via USB cable.
4. Browse to the Primo S2 Official Firmware/Software folder and extract the filePrimoS2_0402_T5281.7z. (You need 7zip installed for this)
5. Extract the file Primo S2 Official Firmware/Flash tools/GNQC_DownLoadV1.6.4.0_EN.rar.
6. Double click on the GNQC_DownLoad.exe located inside the folder you just extracted. You should see a window like below. (click the image to see larger image)
   Attachment 2689033
7. Now click on AP Browse and select the folder Primo S2 Official Firmware/Software/PrimoS2_0402_T5281/PrimoS2_0402_T5281
8. Then click on BP Browse and select the folder Primo S2 Official Firmware/Software/PrimoS2_0402_T5281/PrimoS2_0402_T5281/bp_image
9. Set DL mode to General download. Make sure the "Backup or Restore QCN" checkbox is unchecked.
   Attachment 2689034
10. Now click the DownLoad button, the download process should start.
    Attachment 2689035
11. After a while, the flashing should complete and you will see a confirmation message. Disconnect the phone, pull out the battery, put it in again and push the power button!
    Attachment 2689036